FastLock
FastLock quick release shaft locking collars are used throughout the wire and cable industry for spool retention. The FastLock easily slides onto the spool shaft in one direction and locks in place. To remove, simply pull on the release collar and the FastLock slides off of the shaft.
All FastLocks are constructed from Stainless Steel. Steel versions are available upon request.
English Series
Model
Nominal Shaft Diameter
Solidworks 3D Model
Step 3D Model
FL-.250
1/4″ (0.250)
FL-.312
5/16″ (0.3125)
FL-.375
3/8″ (0.375)
FL-.437
7/16″ (0.4375)
FL-.500
1/2″ (0.500)
FL-.562
9/16″ (0.5625)
FL-.625
5/8″ (0.625)
FL-.750
3/4″ (0.750)
FL-.875
7/8″ (0.875)
FL-1.000
1″
FL-1.250
1.25″
FL-1.375
1.375″
FL-1.500
1.5″
FL-1.625
1.625″
FL-1.750
1.75″
FL-1.875
1.875″
FL-2.000
2″
FL-2.500
2.5″
FL-3.000
3″
Metric Series
Model
Nominal Shaft Diameter
Solidworks 3D Model
Step 3D Model
FL-6mm
6mm
FL-8mm
8mm
FL-10mm
10mm
FL-15mm
15mm
FL-16mm
16mm
FL-18mm
18mm
FL-20mm
20mm
FL-22mm
22mm
FL-25mm
25mm
FL-32mm
32mm
FL-35mm
35mm
FL-36mm
36mm
FL-40mm
40mm
FL-45mm
45mm
FL-50mm
50mm
FL-55mm
55mm
FL-56mm
56mm
Technical Specifications
Axial Holding Force
Magnetic Technologies does not publish these values as it will vary based on shaft diameter and hardness. It is recommended that customers perform their own testing to determine this value for their specific shaft.
Shaft Tolerance
+.001″
-.015″
Shaft Hardness
FastLocks are NOT designed for use on hardened shafts.